The PVS6F provides NIST traceable calibrations and can be used to calibrate capacitance manometers, thermocouple , Pirani , convection enhanced Pirani gauges, pressure transmitters, and mechanical/dial gauges.
0.08% of Reading (± temp. coefficients) Optional 0.05% of Reading (± temp. coefficients) for 1, 10, 100, or 1000 mmHg Full Scale
Resolution
1 x 10-6
Fitting Type
Test Gas Inlet: 0.25 in. Swagelok® bulkhead Test Port (3): Swagelok 8 VCR® male (3)
Operating Temperature
15-40°C
Readout
MKS 670, 5½-digit LCD (one per standard) Unit under test readout electronics: PDR2000
Power Requirements
110 VAC, 60 Hz; 220 VAC, 50 Hz; 15 Amps
Warm-up Time
4 hours. However, use of the internal 500 VA UPS will keep the Transfer Standards warmed up and ready for immediate use for at least 60 minutes.
Weight
Approximately 250 lbs (110 kg)
Pressure Control
Manual needle valve to control gas inlet; manual isolation valve and metering bypass valve for pressure throttle control
Compliance
CE
High Vacuum Gauge
IMAG ionization gauge and controller provides 1 x 10-3 to 1 x 10-9 mmHg measurement
Standby Power
500 V.A. uninterruptible power supply keeps three Transfer Standards warmed up and ready to use for up to 60 min.
Test/Calibration
5-10 psig dry filtered N2
Vacuum Pumping System
Mechanical Pump: Oil free 4 stage diaphragm pump operated as dual two stage diaphragm pumps High Vacuum Pump: Hybrid turbo/drag air-cooled Normal Base Pressure: <5 x 10-7 mmHg
Technical Specs
Type
Portable Vacuum Calibration System
Transfer Standard
AA06A absolute sensors (NIST traceable)
Accuracy
0.08% of Reading (± temp. coefficients) Optional 0.05% of Reading (± temp. coefficients) for 1, 10, 100, or 1000 mmHg Full Scale
Resolution
1 x 10-6
Fitting Type
Test Gas Inlet: 0.25 in. Swagelok® bulkhead Test Port (3): Swagelok 8 VCR® male (3)
Operating Temperature
15-40°C
Readout
MKS 670, 5½-digit LCD (one per standard) Unit under test readout electronics: PDR2000
Power Requirements
110 VAC, 60 Hz; 220 VAC, 50 Hz; 15 Amps
Warm-up Time
4 hours. However, use of the internal 500 VA UPS will keep the Transfer Standards warmed up and ready for immediate use for at least 60 minutes.
Weight
Approximately 250 lbs (110 kg)
Pressure Control
Manual needle valve to control gas inlet; manual isolation valve and metering bypass valve for pressure throttle control
Compliance
CE
High Vacuum Gauge
IMAG ionization gauge and controller provides 1 x 10-3 to 1 x 10-9 mmHg measurement
Standby Power
500 V.A. uninterruptible power supply keeps three Transfer Standards warmed up and ready to use for up to 60 min.
Test/Calibration
5-10 psig dry filtered N2
Vacuum Pumping System
Mechanical Pump: Oil free 4 stage diaphragm pump operated as dual two stage diaphragm pumps High Vacuum Pump: Hybrid turbo/drag air-cooled Normal Base Pressure: <5 x 10-7 mmHg
Additional CAD file downloads are not available for this product.
PVS6F - Drawings
Additional drawings are not available for this product.
PVS6F
Sign In
Password Reset
Enter your email address below to reset your account password.
Password Reset
Email Verification Required
Cart Items Updated
Remove Product
Remove this product from your comparison list?
Check Order Status
Provide an order number and postal code to check the status of an order or download an invoice for an order that has shipped. Login to view your complete order history.
Sign In Required
To access this and other valuable technical resources, please sign in or register for a new online account.