Specifications

SCOM-080x 3U Serial Communication Card

More about the SCOM-080x 3U Serial Communication Card here

SCOM-080x 3U
PCB Dimensions 100mm (3.9370") Height x 160mm (6.2992") Depth x 1.6mm (0.0629") Thickness
Form Factor Plug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
Rear Connectors Metric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution).
Front Panel 128.5mm Height x 20.32mm Depth x 2.5mm Thickness.
Weight 200 g (0.44 lb)
Operating Temperature 0 to 70°C
Storage -40 to +85°C
Humidity 5-95% non-condensing
BUS Interface Compact PCI, 32 bit (16 bit data transfer) 33MHz
Plug and Play Supports auto-recognition of board on power-on and plug-in; includes Device ID, Vendor ID, and configuration
Front Panel Indicators 5V Bus, 5V Isolated, Tx and Rx for each channel
Power
Digital Section +5VDC @ 800 mA from J1
I/O Section +5VDC @ 300 mA generated on board by DC/DC (1.5W)
Number of Outputs 4 or 8 - Configured as RS-232 or RS-422
RS-232 Standard Compatible with EIA/TIA-232E and V.28
RS-422 Standard Compatible with EIA standard RS-422/485
RS-232 Max Data Rate 120Kbps
RS-422 Max Data Rate 1.25Mbps
Isolation Opto-isolation, Min 1500V
Number of Digital outputs 10
Voltage Level TTL
Output Current ±20mA
Isolation Opto-isolation, Min 1500V

This information is subject to change without notice.

Need help?

Contact an Applications Specialist by sending an email to MKS Instruments, or call 512-719-8000.