1. Solutions > 
    2. Optical Gas ... > FTIR Analyze... > MultiGas™ 20...

Optical Gas Analyzers

FTIR Analyzers
NDIR Analyzers
Precisive® TFS™ Tunable Filter Spectroscopy
MultiGas™ TFS™ Monitor
Related: Mass Spectrometry Solutions
MKS Handbook
printPrint Page

MultiGas™ 2030 1065-Ready
5 Hz Engine & Vehicle Emissions Measurement and Certification Analyzer

photo - MultiGas 2030 1065-Ready 5 Hz Engine & Vehicle Emissions Measurement and Certification Analyzer

MultiGas™ 2030 1065-Ready FTIR Analyzer with the Engine and Vehicle Application Package is designed to meet Euro VI/Euro 6 and EPA 40 CFR part 1065/1066 requirements for exhaust emission compliance testing. MKS MultiGas™ FTIR analyzer is the worldwide choice for R&D development and certification test labs for light duty (LD) and heavy duty (HD) vehicle and engines as well as catalyst manufacturers. Different fuel source exhaust emissions are supported not only for raw exhaust measurements but anywhere along the exhaust train. The gas sample is introduced hot and wet directly into the FTIR with no need for chillers. The rugged MultiGas™ 2030 1065-Ready FTIR Analyzer makes it an ideal choice for on-board measurements and available with a broadband detector for the full range of gases (requires liquid N2-LN2) as well as a version with a shorter gas list that does not require LN2.

Features & Benefits:

  • Meets Euro VI and EPA 40 CFR part 1065/1066 requirements
  • 5 Hz data acquisition and analysis for fast transient monitoring
  • Capable of true 5Hz sampling rates
  • High resolution (0.5 cm-1) FTIR reduces interferences from water and CO2, for unbiased, accurate readings
  • Gas cell designed for lowest residence time for "sticky" gases and high temperature resistant insulation
  • Low volume (200 mL), long path (5.11m) gas cell produces fast response time without compromising detection limits
  • Single analyzer measuring over 20 component emissions spanning a large dynamic range
  • Engine and Vehicle Application Package includes drift-free calibrations configured for diesel, CNG, dual fuels and gasoline/ ethanol blend emissions for 191°C
  • 113°C calibrations available for diesel fuel exhausts
  • AK Protocol, OPC, Modbus, analog or digital I/O connectivity

Configurations:

Purchase now or request a quote:
Enter a quantity and click "add to cart"

Part NumberPriceQTY
MultiGas 2030 1065-ReadyQuote Only

Related Products:

Need help?

Contact an Application Specialist by sending an email to MKS Instruments or call 978-645-5500.