MultiGas 2030 CEM-Cert
FTIR Gas Analyzer for Continuous Emissions Monitoring

photo - MultiGas 2030 CEM-Cert FTIR Gas Analyzer for Continuous Emissions Monitoring

MultiGas 2030 CEM-Cert is an FTIR-based gas analyzer designed for integration with complete continuous emissions monitoring systems (CEMS) to measure emissions from stationary sources such as waste incinerators, power plants and cement kilns. This FTIR analyzer is the core technology used in the TÜV and MCERTS certified MGS300 Certified FTIR-based Continuous Emissions Monitoring System (CEMS) from MKS Instruments.

MultiGas 2030 CEM-Cert can directly analyze hot, wet effluent gas streams without sample pre-treatment. With high resolution FTIR technology (0.5 cm-1), MultiGas 2030 CEM-Cert can monitor multiple gas components over a wide range of compositions with minimal cross-interference effects from either water (up to 40%) or other potentially interfering species. Using MultiGas 2030 CEM-Cert permanently-stored internal reference calibration spectra, the need for costly calibration gas mixtures is all but eliminated.

Features & Benefits:

  • Integral component of the TÜV & MCERTS certified MGS300 - meets DIN EN 15267-3 standard
  • Single FTIR analyzer measures main target emission species including: NO, NO2, N2O, SO2, CO, CO2, CH4, HCl, HF, NH3 and H2O - with no additional analyzers required
  • Direct analysis of effluent streams containing up to 40% water - no sample preparation required
  • Permanent reference calibration spectra - all but eliminates the need for costly calibration gas cylinders
  • Patented, linearized detector response - all instruments maintain the same calibration use the same reference calibration spectra
  • Frequency and resolution diagnostics ensure instrument response & calibration for maximum accuracy
  • Heated gas cell with automatic temperature and pressure compensation maximizes accuracy performance and eliminates sample component condensation
  • Continuous monitoring capability with rapid response to changes in the sample composition - complies with t90 performance requirements
  • Software with several communication protocol options for interfacing the MultiGas 2030 with a CEMS control platform - flexible system integration
  • Easy to integrate, install and maintain - low cost of ownership

Applications:

MultiGas 2030 CEM-Cert is designed for integration with complete continuous emissions monitoring systems to measure gaseous emissions from stationary sources such as:

  • Waste incinerators
  • Power plants
  • Cement kilns
  • Large combustion plants
  • Turbine engines

Certification:

The MultiGas 2030 CEM-Cert is the core technology used in the TÜV and MCERTS certified MGS300 system produced by MKS Instruments. MGS300 system certification was achieved in compliance with the DIN EN 15267-3 standard, relating to automated measuring systems for monitoring emissions from stationary sources.

Configurations:

Purchase now or request a quote:
Enter a quantity and click "add to cart"

Part NumberPriceQTY
MultiGas 2030 CEM-CertQuote Only

Need help?

Contact an Application Specialist by sending an email to MKS Instruments or call 978-645-5500.