Specifications

  • Sensor Type
    Differential
  • Full Scale Pressure Ranges
    1, 10, 100, 1000, 5000, 10,000, 15,000, 20,000, 25,000 Torr
  • Sensor Temperature
    Controlled to 45°C
  • Fitting Type
    Swagelok® 4 VCR®-F
  • Accuracy
    Standard: 0.12% of Reading
    Optional: 0.05% or 0.08% of Reading
  • Resolution
    1 x 10-6 of Full Scale
  • Output Signal
    0 to 10 VDC into >10K load
  • Electrical Connector
    25-pin Type "D", male
  • Zero Temperature Coefficient
    12 ppm
  • Span Temperature Coefficient
    100 ppm
  • Operating Temperature
    15° to 40°C
  • Overpressure Limit
    125% of Full Scale or 35 psig whichever is larger
  • Maximum Line Pressure
    150 psig
  • Materials Exposed to Process Gases
    Measurement side (Px): Inconel, 304 & 316 stainless steel
    Reference side (Pr) Inconel, 304 & 316 stainless steel , ceramic, Palladium
  • Response Time
    40 msec
  • Warm-up Time
    4 hours
  • Power Requirements
    ±15 or 24 to 30 VDC @ 700 mA on turn-on,450 mA after warm-up
  • Range Multiplier
    x1 or x0.1 ranges selectable via TTL low or pin grounding
  • Remote Zero Adjust
    Zero adjust initiated via TTL low or pin grounding adjustment range: 2% of Full Scale
  • Compliance
    Compliant to EMC Directive 2014/30/EU when used with an overall metal braided shielded cable properly grounded at both ends

Resources

Need help?

Contact an Applications Specialist by sending us an email