Ozone Sanitation Generator, 10 - 57 g/hr.

Technical Specs

  • Type
    Ozone Sanitation Generator
  • Ozone Concentration
    10 - 6%
  • Ozone Output
    0.5 - 3 lbs/day (10 - 57 g/hr)
  • Ozone Gas Piping Inlet Requirement
    0.25 inch MNPT
  • Oxygen Concentrator Drying Capability
    - 100°F dew point
  • Oxygen Concentrator Parent Gas
    Compressed Air
  • Oxygen Concentrator Gas Output
    25 scfh at 90% oxygen weight conc.
  • Cooling Water Flow Required
    0.5 gpm (at 20 - 40 psig)
  • Cooling Water Temperature Required
    50 - 85°F (at or above ambient dew point)
  • Cooling Water Inlet/Outlet Requirement
    0.25 inch FNPT
  • Compressed Air Flow Requirement
    5.5 cfm at 45 psig (11 scfm)
  • Compressed Air Inlet Requirement
    0.5 inch FNPT
  • Gas Outlet Pressure
    4 - 15 psig
  • Air Tubing
    Polypropylene
  • Water Tubing
    Polypropylene
  • O2/O3 Gas Tubing
    PTFE/304 Stainless Steel
  • Voltage Requirements
    208 - 240VAC
  • Current Requirements
    3.5 Amps Full Load
  • Frequency
    50/60 Hz
  • Phase
    1 - phase
  • Remote Ready
    Dry Contact
  • Remote Control
    4 - 20 mA 10 - 100% Output
  • Remote Enable
    Dry Contact Close to Run
  • Display
    Backlit Graphic LCD Display
  • Alarm
    Dry Contact Close Fault
  • Room Ozone Alarm
    Dry Contact Close to Run
  • Keyboard
    Sealed 16 Key Membrane
  • Frame Material
    304 Stainless Steel
  • Enclosure Material
    Brushed Stainless Steel
  • Dimensions
    Generator: 18 x 18 x 13 in., System: 18 x 71 x 15 in. (width x height x depth)
  • Weight
    200 lbs

Need help?

Contact an Applications Specialist by sending us an email