Ozone Injection System, Ozone Sanitization of DI Water Loop

Technical Specs

  • Type
    Ozonated DI Water Unit
  • Flow Rate
    Injector, Flash reactor for mixing ozone into the DI water
  • Ozone Concentration
    50 - 2000 ppb (0.05 to 2 µgrams/Liter);0 - 30 gpm (AX8600-1), 0 - 10 gpm (AX8600-2), 0 - 30 gpm (AX8600-3)
  • Ozone Mixing
    Sized to flow rate
  • Ozone Degas Chamber
    316L Stainless Steel, Kynar® & Teflon®
  • Ozone Off - Gas Destruct
    Demineralized (resistivity ?50 K?cm)
  • Oxygen Concentration
    High Efficiency heated O3 destruct catalyst
  • Cooling Water Flow Required
    17 - 23°C (63 - 73°F)
  • Cooling Water Filtration Required
    3 L/min (0.8 gpm)
  • Cooling Water Temperature Required
    230VAC (±10%)
  • Cooling Water Quality Required
    20 microns
  • Wetted Materials
    Skid
  • Mobility
    12 SCFH of 95% O2
  • Voltage Requirements
  • Current Requirements
    50/60 Hz
  • Frequency
    AX8600-1: 6.6 x 2.5 x 4.2 ft., AX8600-2: 6.6 x 2.5 x 4.2 ft., AX8600-3: 6.6 x 2.5 x 6.0 ft. (width x depth x height)
  • Phase
    20 Amp
  • Dimensions
    AX8600-1: 1200 lbs, AX8600-2: 1200 lbs, AX8600-3: 1500 lbs

Need help?

Contact an Applications Specialist bysending us an email