Analog IO Module, 8 Current Inputs, 4 Voltage Outputs, EtherCAT Bus

Technical Specs

  • Type
    Analog Input/Output Module
  • ADC Native Resolution
    16-bit
  • Bus
    EtherCAT
  • Input
    Current
  • Number of Inputs
    8 (differential only)
  • Output
    Voltage
  • Number of Outputs
    4, differential or single ended (configured by the user)
  • Minimum Precision
    14 noise-free bit for 95% of readings over full voltage range
  • Input & Output Ranges
    0-5 V, 0-10 V, ±5 V, ±10 V
  • Output Voltage Range
    -10 - 9.9997 Volts
  • Current
    0-20ma , 4-20ma (Factory configurable between voltage and current)
  • Anti-alias HW Filtering
    200Hz ±20%, 6dB/octave minimum
  • Input Voltage Measurement Range
    -10 - +9.9997 V
  • DAC Native Resolution
    16-bit
  • Minimum Input CMRR
    50 dB, 0-1 kHz
  • Maximum Output Current
    5mA, into a 2 kOhm, 10 nF load
  • Minimum Common Mode Voltage Range
    ±8 V
  • Minimum Input Impedance
    10 MOhm
  • Maximum Power Consumption per Module
    Assuming all AOs are current outputs @20mA = 24 V_IO@ 0.25 Amp, 24 V_CORE@ 0.15 Amp
  • Output Accuracy at 25°C Ambient
    ±1.2 mV measured at IO connector with 2 kOhm load
  • Output Accuracy Temperature Drift (20°C - 35°C)
    0.02% of output value
  • Pull Down Resistors on + and - Inputs
    10 MOhm to AGround
  • Protection
    ESD to IEC 61000-4-2 ±4 kV contact, short to 24 V, +15 V, or -15 V
  • Sampling Rate
    6.25 khz (160 µSec, for all 8 channels)
  • Operating Temperature
    0 - 55°C
  • Storage Temperature
    -40 - 85°C
  • Altitude
    Up to 2000 meters
  • Humidity
    5 - 95% non-condensing
  • Dimensions
    35 x 125 x 92.3 mm (1.4 x 3.3 x 4.9 in.)
  • Mounting
    DIN rail
  • Compliance
    CE

Need help?

Contact an Applications Specialist by sending us an email