Networked IO, MicroNode, EtherCAT, Combo IO, Digital Sink
Model: AS08482G-06
Networked IO, MicroNode, EtherCAT, Combo IO, Digital Sink
Networked IO, MicroNode, EtherCAT, Combo IO, Digital Sink
Model: AS08482G-06
Overview
Overview
The EtherCAT® MicroNode™ is a highly flexible I/O device capable of connecting multiple Analog and Digital I/O devices at point of use, simplifying installation by removing long cable routings. With combined high-density analog and digital capability, the MicroNode reduces the number of I/O devices required. This compact device has a DIN rail mounting and provides easy access to I/Os via a standard 50-pin D-sub connector to interface with field I/O wiring, making installation quick and easy. The MicroNode provides diagnostic capability over EtherCAT® using CAT 5 network cabling, ensuring fast alerts to fault detection. Configurable with a combination of digital I/O points and analog input and output points, the EtherCAT® MicroNode is a highly flexible, network I/O device.
Technical Specs
-
TypeCompact Networked I/O
-
ConnectorsPower: 3 pin with polarity and locking (mating connector provided)
I/O: D-sub 50 pin female
ECAT: two RJ45, ECAT in & ECAT out -
CommunicationEtherCAT
-
Power RequirementsDevice: 24VDC, ±10%, 3.2A(max)
AIO Power: Internally powered. No external power required. -
Digital I/ONumber of DIDO: 16 - Each point either digital input or output
Max Output Current: 200 mA
Isolation: 1500V optical isolation between CPU and digital -
Analog InputNumber of Inputs: 8 Single-ended analog inputs
Input Range: -10 to +10V
Resolution: 16-bit
Filtering: 200Hz ±20%, 6dB/octave Min
Protection: ESD to IEC 61000-4-2 ±4kV contact, short to 24V, +15V, or -15V
Non-linearity: ±4 LSB
Offset Error: ±1.2mV @ 25C; ±1.2mV @ 25-45C
Gain Error: ±0.02% Full Scale @ 25C; ±0.04%FS @ 25C
Impedance: 10 MΩ -
Analog OutputNumber of Outputs: 4 single-ended analog outputs
Output Range: -10V to +9.9997V
Resolution: 16-bit
Output Current: Max 5mA per channel
Offset Error: ±1.2mV @ 25C; ±2.4mV @ 25-45C
Gain Error 0.02% Full Scale @ 25C (with 4KΩ load); 0.04% Full Scale @ 25-45C (with 4KΩ load) -
Front Panel IndicatorsNetwork: EtherCAT Run(green) & Error Status(red) per ETG.1300
Digital I/O Points: On/Off Status(green)
System Status: System Ready(green), System Error(red)
-
Rotary SwitchesECAT Network ID: Three hex rotary switches
-
Operating Temperature0 to 50°C
-
Storage Temperature-40 to 85°C
-
Humidity5 to 85% non-condensing
-
Weight0.661 lb (300 g)
-
Dimensions4.921 x 2.066 x 3.633 in.(125 x 52.5 x 92.3 mm)
Resources & Downloads
Literature
- MicroNode™ EtherCAT for Fieldbus Networks (447.4 kB, PDF)
Networked IO, MicroNode, EtherCAT, Combo IO, Digital Sink
Ultra-High Velocity