The AS00967-01 MacroNode™ Compact Networked I/O With cLogic™ Control Engine features 1 digital input/output slot, 1 analog input/output slot, and 2 combination input/output slot on a Modbus/TCP Ethernet network. Digital IO slots feature 24 digital IO points that can be configured as digital inputs or outputs. Analog IO slots feature 16 single-ended analog inputs or 8 analog inputs in differential mode, and 8 single ended analog outputs. Combination IO slots feature 16 digital IO points that can be configured as digital inputs or outputs, 8 single-ended analog inputs and 2 differential analog outputs. Our MacroNode™ Distributed IO provides a high density, compact and economical I/O solution for common Industrial Networks. In addition, these modules contain cLogic™, an on-board C-compiler to handle the distribution of real-time logic tasks. No longer are you limited by network bandwidth, as you designate time critical tasks to your I/O modules, where they belong. Each unit takes advantage of built-in web servers to provide a graphical user interface for setup and diagnostics. In addition to module status, each I/O point can be manually set and read using a standard web browser. Data can also be graphed in real time for complete diagnostics. MacroNode IO snaps on to standard 35mm DIN rail, and contains D-Sub 37 I/O connectors on the top and bottom for high density connectivity. Each connector contains additional power and common points for easy system signal distribution. The front panel contains all configuration switches and setup LED’s.