Base Vacuum Gauge Controller, RS232 and RS485, Series 937B, US Region

Technical Specs

  • Type
    Vaccum System Controller
  • Display
    320 x 240 color QVGA TFT LCD with back lighting. Up to 6 pressure displays. Display indicators for unit of measure, calibration functions, user calibration, set points, gauge position indicators.
  • Display Range
    1.0 x 10-11 - 20,000 Torr, 1.0 x 10-11 - 2.7 x 10+4 mbar, 1.0 x 10-9 - 2.7 x 10+6 Pascal, 1.0 x 10-8 - 2.0 x 10+7 microns
  • Front Panel Controls
    Power on-off switch, setup and operational commands can be accessed via the keypad
  • Units
    User Selectable
  • Region
    United States
  • Electrical Plug
    United States
  • Power Requirements
    150 watts maximum, 100 - 240 VAC 50/60 Hz
  • Interface
    RS232 and RS485
  • Relays
    12
  • Set Point Contact Rating
    2 Amps @ 30 VAC
  • Operating Temperature
    5 - 40° C (41 - 104°F)
  • Storage Temperature
    -10 - 55°C (14 - 131°F)
  • Relative Humidity
    80% max for temperatures less than 31°C, decreasing linearly to 50% maximum at 40°C
  • Leak Test
    Relative logarithmic bar graph display and variable rate audio signal
  • Output
    Buffered, log linear & linear output for each channel & channel combinations
  • Slot 1 Board
    Blank
  • Slot 2 Board
    Blank
  • Slot 3 Board
    Blank
  • Communications Slot
    Blank
  • Insulation Coordination
    Over voltage Category II, Pollution Degree 2
  • Weight
    8 lbs (3.6 kg)
  • Compliance
    CE

Need help?

Contact an Applications Specialist by sending us an email