Software Suite, Vacuum Quality Monitor

Technical Specs

  • Type
    Software
  • Controller Configuration
    Acquisition Modes via application control or external trigger control, calibration, ON/OFF, run/stop, gauge settings, user configuration, save and restore, factory setting restore
  • Compatible Controllers
    835 VQM Controller 835 VQM MS Gauge 390802 Micro-Ion ATM Total Pressure Monitor Interface, USB Port USB 2.0, full speed (12 Mb/s)
  • Data Displayed
    1 - 145 amu scan, total pressure, timestamp, status
  • Data Logging
    Comma delimited text format, 1 - 145 amu scan (1 - 300 amu optional), total pressure, timestamp, status per scan, 85 ms logging rate using the recommended PC
  • Gas Recipe
    Correlation fit against expected gas spectrum
  • Gas Recipe Response Time
    85 ms, 1 - 145 amu, 10-gases, with the recommended PC
  • Leak Detection
    User assigned limit and leak gas detection, audible tone relative to the quantity of leak
  • Gas Display Table
    Automatic listing by amu or gas type (user selectable)
  • Minimum Computer Requirements
    Intel® Core™ 2 Duo T7250 @ 2 GHz with 2.56 GB RAM or equivalent, 1024 x 768 pixel display, larger to take advantage of resizing, Windows 7 (32 or 64 bit), Windows XP (32 bit) SP2, .NET 3.5 Framework SP1 operating systems, 1.6 GB hard drive (more needed for large log files)
  • Pressure Trend
    10 maximum plus total pressure, user selection in display table
  • Software Interface
    Required: API, LabVIEW Vis, Optional: LabVIEW 2011 required to use LabVIEW Vis. .NET development platform required to use API. (Tested with Visual Studio 2010.)
  • Sensor Spectrum
    Displayed, 1 - 145 amu or 1 - 300 amu

Need help?

Contact an Applications Specialist by sending us an email