Digital Power Supply, Display, 1 Channel, ±15 VDC, 0.25 Amp, RS232, 220 VAC

Technical Specs

  • Type
    Power Supply and Readout
  • Display
    4.5 digit LED
  • Channels
    1
  • Power Requirements
    220 VAC
  • Input Signal
    ±10 VDC
  • Output Power
    ±15 VDC ±5% @ 0.25 Amps max.
  • Output Signal
    Pressure and alarm status, and provides setup Input of alarm trip points, hysteresis, and display zero
  • Interface
    RS232
  • Communication Protocol
    RS232
  • Trip Points
    4 open collector transistors (2 high, 2 low) with adjustable hysteresis and status LEDs, adjustable from 1 to 100%
  • Trip Point Relay Ratings
    Open collector transistors rated for 50 Volts/100 mA max.
  • Use
    622, 623, 624, 626, 627, 223, 722, 740, 750, 850, 852, 870, 872 manometers, Display only for 120, 220, 619, 621, 631 manometers, 358, 558, 179 mass flow meters
  • Operating Temperature
    0 - 55°C
  • Mounting
    0.125 in. DIN enclosure, 96 x 48 x 140 mm, case mounts in 92 x 45 panel cutout
  • Compliance
    CE

Need help?

Contact an Applications Specialist by sending us an email