Sorry, this product is no longer offered for sale.
Digital Power Supply, Display, 1 Channel, ±15 VDC, 0.25 Amp, 120 VAC
Model: 660C10
Digital Power Supply, Display, 1 Channel, ±15 VDC, 0.25 Amp, 120 VAC
Digital Power Supply, Display, 1 Channel, ±15 VDC, 0.25 Amp, 120 VAC
Model: 660C10
Overview
Overview
The 660C10 Single-channel Digital Power Supply and Readout is a microprocessor-based power supply and readout module for use with capacitance manometers and mass flow meters requiring ±15 VDC and 250 mA maximum power, and any output signal in the range of 0-10 VDC. The front panel's menu-selectable, input scaler, and Full Scale calibration functions allow for direct reading with any capacitance manometer range or engineering units, and compensation for gas correction factors when used with mass flow meters. Sensor zero is provided via the front panel membrane switch, and remotely via TTL signals or with the RS-232 communications. It required 120 VAC input power.
Technical Specs
-
TypePower Supply and Readout
-
Display4.5 digit LED
-
Channels1
-
Power Requirements120 VAC
-
Input Signal±10 VDC
-
Output Power±15 VDC ±5% @ 0.25 Amps max.
-
Output Signal0 to ±VDC capacitance manometer passed through, not zeroed
-
Communication ProtocolN/A
-
Trip Points4 open collector transistors (2 high, 2 low) with adjustable hysteresis and status LEDs, adjustable from 1 to 100%
-
Trip Point Relay RatingsOpen collector transistors rated for 50 Volts/100 mA max.
-
Use622, 623, 624, 626, 627, 223, 722, 740, 750, 850, 852, 870, 872 manometers, Display only for 120, 220, 619, 621, 631 manometers, 358, 558, 179 mass flow meters
-
Operating Temperature0 - 55°C
-
Mounting0.125 in. DIN enclosure, 96 x 48 x 140 mm, case mounts in 92 x 45 panel cutout
-
ComplianceCE
Resources & Downloads
Drawings & CADs
Digital Power Supply, Display, 1 Channel, ±15 VDC, 0.25 Amp, 120 VAC
Ultra-High Velocity