The 626C01TBE Unheated Absolute Baratron® Capacitance Manometer features 1 Torr full scale pressure measurement with 0.25% of reading accuracy, and an 8 VCR type female fitting. It requires ±15VDC input voltage and provides a high-level 0-10 VDC analog output signal that is linear with pressure. This analog output can be interfaced with an MKS pressure controller, an MKS power supply/display instrument, or any instrument that meets these requirements. Changes in pressure/vacuum are determined by measuring the change in capacitance between the sensor's diaphragm and an adjacent electrode disk. This capacitance change is converted to a useable output by patented signal-conditioning electronic circuits. The radially-tensioned Inconel® diaphragm in the sensor provides very fast response (<20 msec in many cases), low hysteresis, excellent repeatability, very high resolution (to 0.001% of Full Scale), exceptionally high corrosion resistance, and double-walled welded construction for operator safety. The sensor itself can withstand repeated exposures to 45 psia (3.1 bar) without permanent degradation or shifting, allowing it to operate in virtually any process system. The 626C Baratron® capacitance manometer operates at ambient conditions and is suited for many industrial, electronic, and research applications. The 626C has a 15-Pin D-Subminiature Electrical Connector.