Pressure Switch, Single-ended, 10 Torr, NW16 ISO-KF, 9-Pin Type D, Referenced to Vacuum
Model: 51C11TGA2BA010
Pressure Switch, Single-ended, 10 Torr, NW16 ISO-KF, 9-Pin Type D, Referenced to Vacuum
Pressure Switch, Single-ended, 10 Torr, NW16 ISO-KF, 9-Pin Type D, Referenced to Vacuum
Model: 51C11TGA2BA010
Overview
Overview
The 51C11TGA2BA010 Single-end Pressure Switch is ranged for 10 Torr, has an ISO-KF NW16 fitting, 20-30 VDC input voltage, energizes with pressure below the set point, a 9-Pin Type "D" male subminiature electrical connector, and accuracy of 0.5% of Full Scale. It offers accurate and reliable protection for vacuum vacuum/pressure processes for applications where a DC signal output is not required. It is referenced to vacuum.
Technical Specs
-
TypeVacuum/pressure Switch
-
ConfigurationSingle-ended
-
Pressure Range Full Scale10 Torr
-
Fitting TypeNW16 ISO-KF
-
Connector9-pin type D male
-
Accuracy±0.5% of Full Scale (±temperature coefficient)
-
Trip Point10 Torr
-
Relay ModeEnergizes below set point
-
Trip Point Dead Band±0.3 Torr (nominal)
-
Response Time<20 msec
-
Internal Volume3.3 cc
-
Temperature Coefficient±0.07% of Full Scale/°C
-
Materials Exposed to Process GasesInconel and 316L S.S.
-
Overpressure2 × Full Scale or 45 psia, whichever is greater
-
OutputsElectromechanical relay SPDT (isolated) contacts rated up to 1 Amp @ 30 VDC resistive.
-
Power Requirements20-30 VDC
-
Ambient Operating Temperature0-50°C
-
ComplianceCE
Resources & Downloads
Drawings & CADs
- 41, 51 Baratron® Pressure/Vacuum Switch Dimensional Drawing (36.9 kB, PDF)
Pressure Switch, Single-ended, 10 Torr, NW16 ISO-KF, 9-Pin Type D, Referenced to Vacuum
Ultra-High Velocity