Vacuum Gauge Controller, Micro-Ion, Center Mount, Torr, 120 VAC Cord

Technical Specs

  • Type
    Vacuum Gauge Controller
  • Display
    2 digits plus exponent, green LED
  • Display Range
    <1 x 10-9 to 1000 Torr (for air and N2)
  • Display Update Rate
    Every 0.5 sec
  • Units
    Torr
  • Compatible with
    355 Micro-Ion® Gauge
  • Electrical Plug
    North America & Japan 120 VAC
  • Power Requirements
    100 - 240 VAC, 50 - 60 Hz, 50 Watts max
  • Interface
    No
  • Relays
    0
  • Emission Current
    0.02, 1 or 4 mA, switch selectable
  • Degas
    Electron bombardment, 4 Watts with 2-minute timer
  • Operating Temperature
    0 - 40°C ambient, non-condensing
  • Storage Temperature
    -40 - 70°C
  • Case Materials
    Aluminum extrusion
  • Mounting
    Center mount for 19 in. rack
  • Filament Selections
    Filament 1, filament 2 or both, switch selectable
  • Overpressure Protection
    Ion gauge turns off at factory set upper pressure limit
  • Output
    1 Volt/decade, logarithmic, 0 - 10 V, Analog
  • Remote Input Signals
    Gauge on/off and degas on/off, selected by momentary continuity to ground
  • Remote Output Signals
    Gauge status indicated by a single-pole, double-throw relay rated at 1 A @ 30 VDC resistive, AC non-inductive
  • Connector
    9-pin subminiature-D male
  • Weight
    1.8 kg (4 lbs)
  • Compliance
    CE

Need help?

Contact an Applications Specialist by sending us an email