$ EZ-EDS Version 3.21.1.20161208 Generated Electronic Data Sheet [File] DescText = "GP390 Vacuum Gauge"; CreateDate = 05-19-2005; CreateTime = 15:58:00; ModDate = 07-14-2017; ModTime = 14:23:38; Revision = 1.5; $ Rev 1.5 corresponds to rev B. [Device] VendCode = 92; VendName = "Granville-Phillips Company"; ProdType = 28; ProdTypeStr = "Vacuum Pressure Gauge"; ProdCode = 5; MajRev = 1; MinRev = 18; ProdName = "GP390"; Catalog = "390610"; [IO_Info] Default = 0x0001; $ Poll PollInfo = 0x0005, $ Poll or COS 4, $ Default Input 1; $ Default Output COSInfo = 0x0005, $ Poll or COS 5, $ Default Input 0; $ Default Output Input1 = 2, $ 2 bytes 0, $ all bits are significant 0x0005, $ Poll or COS connection "Input Assembly 1", $ Name String 6, $ Path Size "20 04 24 01 30 03", $ Path, assembly object, inst 01, attr 03 "int Pressure Output"; $ Help string Input2 = 3, 0, 0x0005, "Input Assembly 2", 6, "20 04 24 02 30 03", "one byte Status, int Pressure"; Input3 = 4, 0, 0x0005, "Input Assembly 4", 6, "20 04 24 04 30 03", "FP Pressure Output"; Input4 = 5, 0, 0x0005, "Input Assembly 5", 6, "20 04 24 05 30 03", "One byte Status, FP Pressure"; Input5 = 8, 0, 0x0005, "Input Assembly 15", 6, "20 04 24 0F 30 03", "int Pressure, int Differential"; Input6 = 9, 0, 0x0005, "Input Assembly 16", 6, "20 04 24 10 30 03", "byte Status, int Pressure int Differential"; Input7 = 10, 0, 0x0005, "Input Assembly 17", 6, "20 04 24 11 30 03", "Byte Status, byte Trippoints, int Pressure, int Differential"; Input8 = 16, 0, 0x0005, "Input Assembly 18", 6, "20 04 24 12 30 03", "FP Pressure, FP Differential, 8 byte fill"; Input9 = 17, 0, 0x0005, "Assembly 19", 6, "20 04 24 13 30 03", "Byte Status, FP Pressure, FP Differential, 8 byte fill"; Input10 = 18, 0, 0x0005, "Assembly 20", 6, "20 04 24 14 30 03", "Byte Status, byte Trippoints, FP Pressure, FP Differential, 8 byte fill"; Output1 = 1, 0, 0x0001, "Output Assembly 100", 6, "20 04 24 64 30 03", "Bit 6 = Gauge enable, Bit 0 = Degas"; [ParamClass] Object_Name = "Parameter Object"; Object_Class_Code = 0x0F; MaxInst = 67; Descriptor = 0x000B; CfgAssembly = 0; [Params] Param1 = 0, $ always zero 6,"20 30 24 01 30 0B", $ Path size $ Path 0x0010, $ Descriptor 0xC6, $ data type 1, $ data size "Device Status", $ name "", $ units "Current state of the device.", $ help string 0,6,4, $ min, max, default value ,,,, $ mult, div, base, offset scaling ,,,, $ Parameter object links 0; $ decimal places Param2 = 0, 6,"20 30 24 01 30 0C", 0x0010, 0xD1, 1, "Exception Status", "", "bit 1 = alarm, bit 5 = warning", 0,255,0, ,,,, ,,,, 0; Param3 = 0, 6,"20 31 24 01 30 04", 0x0000, 0xC7, 2, "Conductron Data Units", "", "769=torr, 776=mbar, 777=pascal.", 769,777,769, ,,,, ,,,, 0; Param4 = 0, 6,"20 31 24 01 30 05", 0x0030, 0xC1, 1, "Reading Valid 1", "", "Indicates that the Value attribute contains a valid value", 0,1,1, ,,,, ,,,, 0; Param5 = 0, 6,"20 31 24 01 30 06", 0x0070, 0xCA, 4, "Value 1", "", "Pressure reading", 1.0E-10,9.9E+9,1, 1,1,1,0, ,,,, 0; Param6 = 0, 6,"20 31 24 01 30 07", 0x0030, 0xD1, 1, "Status 1", "", "bit 0 = Alarm bit 2 = Warning ", 0,5,0, ,,,, ,,,, 0; Param7 = 0, 6,"20 31 24 01 30 22", 0x0050, 0xC7, 2, "Trigger Delta 1", "", "Produce Trigger Delta, percent of pressure reading, 0 to 99%.", 0,990,200, 1,10,1,0, ,,,, 0; Param8 = 0, 6,"20 31 24 01 30 63", 0x0010, 0xC7, 2, "Conductron Subclass Number", "", "Heatloss gauge", 2,2,2, ,,,, ,,,, 0; Param9 = 0, 6,"20 31 24 01 30 67", 0x0010, 0xC7, 2, "Max Temperature 1", "C", "Electronics Temperature, max recorded value.", 0,255,20, ,,,, ,,,, 0; Param10 = 0, 6,"20 31 24 01 30 68", 0x0010, 0xC7, 2, "Current Temperature 1", "C", "Electronics Temperature", 0,255,20, ,,,, ,,,, 0; Param11 = 0, 6,"20 31 24 02 30 04", 0x0000, 0xC7, 2, "Micro-Ion Data Units", "", "769=torr, 776=mbar, 777=pascal.", 769,777,769, ,,,, ,,,, 0; Param12 = 0, 6,"20 31 24 02 30 05", 0x0030, 0xC1, 1, "Reading Valid 2", "", "Indicates that the Value attribute contains a valid value", 0,1,1, ,,,, ,,,, 0; Param13 = 0, 6,"20 31 24 02 30 06", 0x0070, 0xCA, 4, "Value 2", "", "Pressure reading", 1.0E-10,9.9E+9,1.0E-5, 1,1,1,0, ,,,, 0; Param14 = 0, 6,"20 31 24 02 30 07", 0x0030, 0xD1, 1, "Status 2", "", "bit 0 = Alarm ", 0,1,0, ,,,, ,,,, 0; Param15 = 0, 6,"20 31 24 02 30 22", 0x0050, 0xC7, 2, "Trigger Delta 2", "", "Produce Trigger Delta, percent of pressure reading, 0 to 99%", 0,990,200, 1,1,1,0, ,,,, 0; Param16 = 0, 6,"20 31 24 02 30 58", 0x0020, 0xC1, 1, "Degas On", "", "Active Degas Mode, terminated by device timeout, or remotely", 0,1,0, ,,,, ,,,, 0; Param17 = 0, 6,"20 31 24 02 30 59", 0x0010, 0xC6, 1, "Active Filament", "", "Byte showing enabled filament(s). Bit0 = fil1, bit1 = fil2.", 0,3,1, ,,,, ,,,, 0; Param18 = 0, 6,"20 31 24 02 30 5B", 0x0050, 0xCA, 4, "Emission Current", "", "Floating pt value representing Ion Gauge emission current(Amps)", 0.00002,0.015,0.00002, 1,1,1,0, ,,,, 0; Param19 = 0, 6,"20 31 24 02 30 5D", 0x0000, 0xC1, 1, "Filament ON", "", "Turns the filament on and off and indicates status.", 0,1,0, ,,,, ,,,, 0; Param20 = 0, 6,"20 31 24 02 30 5E", 0x0030, 0xD2, 2, "Sensor Warning 2", "", "bit0 = filament 1 open, bit1 - filament 2 open", 0,3,0, ,,,, ,,,, 0; Param21 = 0, 6,"20 31 24 02 30 5F", 0x0030, 0xD2, 2, "Sensor Alarm 2", "", "byte0, bits 0 and 1 = emission failure, byte1, bit4 = HV failure", 0,4099,0, ,,,, ,,,, 0; Param22 = 0, 6,"20 31 24 02 30 60", 0x0030, 0xD1, 1, "Status Extension 2", "", "Logical inversion of status, bit0 = reading invalid.", 0,1,0, ,,,, ,,,, 0; Param23 = 0, 6,"20 31 24 02 30 63", 0x0010, 0xC7, 2, "Micro-Ion Subclass Number", "", "Hot Cathode Gauge", 5,5,5, ,,,, ,,,, 0; Param24 = 0, 6,"20 31 24 02 30 67", 0x0010, 0xC7, 2, "Max Temperature 2", "C", "Electronics Temperature, max recorded value.", 0,255,20, ,,,, ,,,, 0; Param25 = 0, 6,"20 31 24 02 30 68", 0x0010, 0xC7, 2, "Current Temperature", "C", "Electronics Temperature", 0,255,20, ,,,, ,,,, 0; Param26 = 0, 6,"20 31 24 02 30 69", 0x0000, 0xC6, 1, "Filament Mode", "", "0 = Auto, 1 = Alternate, 2 = Manual", 0,2,1, ,,,, ,,,, 0; Param27 = 0, $ reserved, shall equal 0 6,"20 35 24 01 30 0E", $ Link Path Size, Link Path 0x0000, $ Descriptor 0xC7, $ Data Type 2, $ Data Size in bytes "Trip Point 1 Assignment", $ name "", $ units "Differential pressure or Vaccum pressure", $ help string ,,0x0024, $ min, max, default data values ,,,, $ mult, div, base, offset scaling ,,,, $ mult, div, base, offset links ; $ decimal places Enum27 = 0x0024,"Assign Vacuum pressure", 0x0324,"Assign Differential pressure"; Param28 = 0, 6,"20 35 24 01 30 05", 0x0000, 0xCA, 4, "Trip Point 1 Value", "", "Defines the value below which a trip point condition will occur", -800,1.0E+3,1.0E+3, ,,,, ,,,, 0; Param29 = 0, 6,"20 35 24 01 30 06", 0x0000, 0xC1, 1, "Trip Point 1 Enable", "", "Enables the Low Trip Point.", 0,1,0, ,,,, ,,,, 0; Param30 = 0, 6,"20 35 24 01 30 07", 0x0030, 0xC1, 1, "Trip Point 1 Status", "", "State of Trip point.", 0,1,1, ,,,, ,,,, 0; Param31 = 0, 6,"20 35 24 01 30 08", 0x0000, 0xC1, 1, "Trip Point 1 Polarity", "", "Normal/Reverse polarity of Status attribute 0=normal, 1=reverse", 0,1,0, ,,,, ,,,, 0; Param32 = 0, 6,"20 35 24 01 30 09", 0x0030, 0xC6, 1, "Trip Point 1 Override", "", "Specifies override status from application layer.", 0,1,0, ,,,, ,,,, 0; Param33 = 0, 6,"20 35 24 01 30 0A", 0x0040, 0xCA, 4, "Trip Point 1 Hysteresis", "%", "% above setting where trip point will clear as pressure rises", 0,10000,20, 1,1,1,0, ,,,, 0; Param34 = 0, $ reserved, shall equal 0 6,"20 35 24 02 30 0E", $ Link Path Size, Link Path 0x0000, $ Descriptor 0xC7, $ Data Type 2, $ Data Size in bytes "Trip Point 2 Assignment", $ name "", $ units "Differential pressure or Vaccum pressure", $ help string ,,0x0024, $ min, max, default data values ,,,, $ mult, div, base, offset scaling ,,,, $ mult, div, base, offset links ; $ decimal places Enum34 = 0x0024,"Vacuum pressure", 0x0324,"Differentional pressure"; Param35 = 0, 6,"20 35 24 02 30 05", 0x0000, 0xCA, 4, "Trip Point 2 Value", "", "Defines the value below which a trip point condition will occur", -800,1.0E+3,1.0E+3, ,,,, ,,,, 0; Param36 = 0, 6,"20 35 24 02 30 06", 0x0000, 0xC1, 1, "Trip Point 2 Enable", "", "Enables the Low Trip Point 2.", 0,1,0, ,,,, ,,,, 0; Param37 = 0, 6,"20 35 24 02 30 07", 0x0030, 0xC1, 1, "Trip Point 2 Status", "", "State of Trip point 2.", 0,1,1, ,,,, ,,,, 0; Param38 = 0, 6,"20 35 24 02 30 08", 0x0000, 0xC1, 1, "Trip Point 2 Polarity", "", "Normal/Reverse polarity of Status attribute 0=normal, 1=reverse.", 0,1,0, ,,,, ,,,, 0; Param39 = 0, 6,"20 35 24 02 30 09", 0x0030, 0xC6, 1, "Trip Point 2 Override", "", "Specifies override status from application layer.", 0,1,0, ,,,, ,,,, 0; Param40 = 0, 6,"20 35 24 02 30 0A", 0x0040, 0xCA, 4, "Trip Point 2 Hysteresis", "%", "% above setting where trip point will clear as pressure rises", 0,10000,20, 1,1,1,0, ,,,, 0; Param41 = 0, $ reserved, shall equal 0 6,"20 35 24 03 30 0E", $ Link Path Size, Link Path 0x0000, $ Descriptor 0xC7, $ Data Type 2, $ Data Size in bytes "Trip Point 3 Assignment", $ name "", $ units "Differential pressure or Vaccum pressure", $ help string ,,0x0024, $ min, max, default data values ,,,, $ mult, div, base, offset scaling ,,,, $ mult, div, base, offset links ; $ decimal places Enum41 = 0x0024,"Vacuum pressure", 0x0324,"Differential pressure"; Param42 = 0, 6,"20 35 24 03 30 05", 0x0000, 0xCA, 4, "Trip Point 3 Value", "", "Defines the value below which a trip point condition will occur", -800,1.0E+3,1.0E+3, ,,,, ,,,, 0; Param43 = 0, 6,"20 35 24 03 30 06", 0x0000, 0xC1, 1, "Trip Point 3 Enable", "", "Enables the Low Trip Point 3.", 0,1,0, ,,,, ,,,, 0; Param44 = 0, 6,"20 35 24 03 30 07", 0x0030, 0xC1, 1, "Trip Point 3 Status", "", "State of Trip point 3.", 0,1,1, ,,,, ,,,, 0; Param45 = 0, 6,"20 35 24 03 30 08", 0x0000, 0xC1, 1, "Trip Point 3 Polarity", "", "Polarity of Status attribute, 0=normal, 1=reverse", 0,1,0, ,,,, ,,,, 0; Param46 = 0, 6,"20 35 24 03 30 09", 0x0030, 0xC6, 1, "Trip Point 3 Override", "", "Specifies override status, from application layer.", 0,1,0, ,,,, ,,,, 0; Param47 = 0, 6,"20 35 24 03 30 0A", 0x0040, 0xCA, 4, "Trip Point 3 Hysteresis", "%", "% above setting where trip point will clear as pressure rises", 0,10000,20, 1,1,1,0, ,,,, 0; Param48 = 0, $ reserved, shall equal 0 6,"20 35 24 04 30 0E", $ Link Path Size, Link Path 0x0010, $ Descriptor 0xC7, $ Data Type 2, $ Data Size in bytes "Trip Point 4 Assignment", $ name "", $ units "Always Micro-Ion sensor", $ help string ,,0x0224, $ min, max, default data values ,,,, $ mult, div, base, offset scaling ,,,, $ mult, div, base, offset links ; $ decimal places Param49 = 0, 6,"20 35 24 04 30 05", 0x0040, 0xCA, 4, "Trip Point 4 Value", "", "Defines the pressure value below which High Emission starts.", 5.0E-8,3.0E-4,5.0E-6, 1,1,1,0, ,,,, 0; Param50 = 0, 6,"20 35 24 04 30 07", 0x0030, 0xC1, 1, "Trip Point 4 Status", "", "State of Trip point 4.", 0,1,1, ,,,, ,,,, 0; Param51 = 0, 6,"20 35 24 04 30 09", 0x0030, 0xC6, 1, "Trip Point 4 Override", "", "Specifies an Override status.", 0,2,0, ,,,, ,,,, 0; Param52 = 0, 6,"20 04 24 00 30 65", 0x0000, 0xC6, 1, "Produced Instance", "", "Select 1, 2, 4 or 5, vendor specific attribute.", 1,20,5, ,,,, ,,,, 0; Param53 = 0, 6,"20 04 24 00 30 66", 0x0000, 0xC6, 1, "Consumed Instance", "", "Select 0 (none) or 100, vendor specific attribute.", 0,100,100, ,,,, ,,,, 0; Param54 = 0, 6,"20 2B 24 01 30 01", 0x0000, 0xC7, 2, "Acknowledge timer", "mS", "Time to wait for acknowledge before resending.", 0,65535,16, ,,,, ,,,, 0; Param55 = 0, 6,"20 2B 24 01 30 02", 0x0000, 0xC6, 1, "Acknowledge retry limit", "", "Acknowledge retry limit for COS.", 0,255,1, ,,,, ,,,, 0; Param56 = 0, 6,"20 2B 24 01 30 03", 0x0010, 0xC7, 2, "Producing connection", "", "Producing connection instance.", 0,1,1, ,,,, ,,,, 0; Param57 = 0, 6,"20 31 24 00 30 5E", 0x0070, 0xCA, 4, "Active Value", "", "Pressure reading of active gauge.", 1.0E-10,9.9E+9,1, 1,1,1,0, ,,,, 0; Param58 = 0, 6,"20 31 24 02 30 6A", 0x0000, 0xC7, 2, "IG Delay Time", "S", "Delay lighting IG filament on pump down.", 0,600,0, ,,,, ,,,, 0; Param59 = 0, 6,"20 31 24 02 30 6B", 0x0010, 0xC6, 1, "IG Filament Type", "", "IG Filament Type, Y=2 T=3. This affects Fil Mode & IG Delay", 2,3,2, ,,,, ,,,, 0; Param60 = 0, 6,"20 31 24 03 30 04", 0x0000, 0xC7, 2, "Differential Data Units 1", "", "769=torr, 776=mbar, 777=pascal.", 769,777,769, ,,,, ,,,, 0; Param61 = 0, 6,"20 31 24 03 30 05", 0x0030, 0xC1, 1, "Reading Valid 3", "", "Indicates that the Value attribute contains a valid value", 0,1,1, ,,,, ,,,, 0; Param62 = 0, 6,"20 31 24 03 30 06", 0x0070, 0xCA, 4, "Value 3", "", "Differential Pressure reading", -760,250,0, 1,1,1,0, ,,,, 0; Param63 = 0, 6,"20 31 24 03 30 07", 0x0030, 0xD1, 1, "Status 3", "", "bit 0 = Alarm, bit 2 = Warning ", 0,5,0, ,,,, ,,,, 0; Param64 = 0, 6,"20 31 24 03 30 22", 0x0050, 0xC7, 2, "Trigger Delta 3", "", "Produce Trigger Delta, percent of pressure reading, 0 to 99%.", 0,990,200, 1,1,1,0, ,,,, 0; Param65 = 0, 6,"20 31 24 03 30 63", 0x0010, 0xC7, 2, "Differential Subclass Number", "", "Heatloss gauge", 3,3,3, ,,,, ,,,, 0; Param66 = 0, 6,"20 31 24 03 30 67", 0x0010, 0xC7, 2, "Max Temperature 3", "C", "Electronics Temperature, max recorded value.", 0,255,20, ,,,, ,,,, 0; Param67 = 0, 6,"20 31 24 03 30 68", 0x0010, 0xC7, 2, "Current Temperature 3", "C", "Electronics Temperature", 0,255,20, ,,,, ,,,, 0;