Compare Model Drawings, CAD & Specs Availability Price
pdr2000a two-channel digital power supply and readout
Digital Power Supply, Display, 2 Channels, RS232, ±15 VDC, 0.75 Amp
$820

Specifications

  • Display
    Digital, 4-place Red LED
  • Display Units
    Torr/mTorr, or mbar/microbar
  • Number of Channels
    2
  • Power Requirements
    110-240 VAC; 47-63 Hz, 40 VA
  • Input Signal
    0 to 10 VDC
  • Output Power
    ±15 VDC @ 750 mA
  • Output Signal
    Linear, 4 VDC for Full Scale output, (0.5 VDC per decade), 0-10 VDC each transducer
  • Communication Protocol
    RS-232 (9600 baud, 8 data bits, no parity, 1 stop bit)
  • Trip Points
    2 fully programmable trip points
  • Trip Point Relay Ratings
    2 Amps @ 30 VDC
  • For Use With
    MKS Instruments type 628 (one only), 622, 623, 624, 627, 722, 750, 850, 852, 870, 872, 223 (unidirectional only) capacitance manometers
  • Controls
    Gauge Select, Full Scale Adjust, Calibrate, Zero, Set Point 1 High, Set Point 1 Low, Set Point 2 High, Set Point 2 Low, Torr/mbar Select
  • Operating Temperature
    2° - 50°C
  • Weight
    1 lb
  • Dimensions
    94 mm x 47 mm x 165 mm
  • Mounting
    1/8 inch DIN enclosure
  • Compliance
    EMC Directive 2014/30/EC
    RoHS Directive 2011/65/U

Features

Two Configurable Process Trip Points

Two process relay trip points are available and may be assigned to either of the two manometer channels. Upper and lower settings allow the user complete control over the hysteresis of the control trip point. The relays have isolated outputs and are rated for 2 Amps at 240 VAC.

Displays Transducer Input in Torr or mbar Units

The PDR2000 provides ±15 VDC, 750 mA to power a capacitance manometer and displays the 0 to 10 VDC pressure transducer output in Torr or mbar Units.  A 9-pin type "D" connector is used to interface the Baratron® manometers.  

Need help?

Contact an Applications Specialist by sending us an email