Compare Model Drawings, CAD & Specs Availability Price
industrial automation serial communication module
Serial Communication Module, RS232, RS422, RS485, 4 Channel
$790

Specifications

  • Type
    Serial Communication Module
  • Number of Ports
    4
  • Power Consumption
    Input Voltage: 24 VDC
    Power Consumption: 24 C CORE: 3.5 W
    24 V I/O: 4 W
  • Connector
    9-pin D-Sub Male (similar to MKS CN00030G)
  • Maximum Speed Support for RS485
    6.9 Mbps
  • Serial Communication Parity
    None, Even, Odd, Space, Mark
  • Serial Communication Data Bits
    5, 6, 7, 8
  • Serial Communication Maximum Baud Rate
    7.5Mbps for RS485, 500Kbps for RS232
  • Serial Signals for RS-485-2w
    Data+, Data-, Ground
  • Serial Signals for RS-232
    TxD, RxD, RTS, CTS, Ground
  • Serial Signals for RS-422
    Tx+, Tx-, Rx+, Rx-, Ground
  • Serial Communication Stop Bits
    1, 1.5, 2
  • Serial Communication Flow Control
    RTS/CTS and DTR/DSR (RS-232 only), xON/xOFF
  • Serial Standards
    RS232/RS422/RS485 (support for RS485 full & half duplex) note: every 2 ports share the same signal configuration for half/full duplex
  • Tx/Rx FIFO Buffer Size
    128 bytes
  • Serial Signals for RS-485-4w
    Tx+, Tx-, Rx+, Rx-, Ground
  • Operating Temperature
    0 to 55°C, with 2°C upper limit reduction per 1000 ft above sea level
  • Storage Temperature
    -40 to 85°C
  • Altitude
    up to 2000 meters
  • Humidity
    5 - 85% non-condensing
  • Dimensions
    52.5 x 125 x 92.3 mm (W x H x D)
  • Mounting
    DIN rail

Features

MKS Automation Platform

These modules are part of the MKS Automation Platform that provides a modular, scalable and configurable solution to meet your automation and control requirements. Designed to provide a complete automation solution to improve operational and productivity efficiencies, the Automation Platform enables faster implementations, provides lowest total cost of ownership, and improves utilization of existing tools and assets.

Need help?

Contact an Applications Specialist by sending us an email