COVID-19 Coronavirus Information – Travel, health & safety precautions for MKS employees & partners. Learn More
Sorry, this family of products is no longer available. Contact Us for a recommended replacement.
DeviceNet™ to RS422/485 Gateways
Overview
The RS422/485 to DeviceNet™ serial gateway is housed in a 21/2 x 31/4 inch plastic housing with mounting tabs. A 5 pin micro connector provides the DeviceNet™ interface and a 9 pin D connector provides the RS422/485 interface. The DeviceNet™ channel is fully isolated from the supplied power.
Specifications
-
TypeAS01367 Serial Gateway DeviceNet™ to RS422/485 Interface
-
Power Requirements11-28 VDC @ 50mA
Loss of Ground: Yes
Reverse Polarity: -30 VDC -
RS422/RS485 Isolation500 Volts
-
RS422/RS485 Overload Protection±0 Volt
-
RS232 Short CircuitIndefinite
-
RS422/RS485 ESD Protection±10 kv
-
RS422/RS485 Data Rates300, 1200, 2400, 4800, 9600, 19.2, 38.4
-
RS422/RS485 ParityEven/Odd/None
-
RS422/RS485 Data Size8/7 bits (software config.)
-
RS422/RS485 Stop Bits1/2 (software configurable)
-
RS422/RS485 Flow ControlNone. x-ON / x-OFF
-
DeviceNet Signal LevelsISO11598
-
Dimensions3.25 x 2.37 x 1.08 inches
-
Mounting Holes1/2 inch tab, 3/16 diameter Mtg Hole
-
EncapsulationRTV Silicon Compound
-
Operating Temperature0-50°C
Resources
Literature
- AS01367 Serial Gateway, DeviceNet™ to RS422/485 Interface (167.9 kB, PDF)
- CDN367 Serial Gateway (DeviceNet™ to RS422/485 Interface) (167.3 kB, PDF)
Manuals
- CDN360 Series DeviceNet™ Gateway User Manual (802.5 kB, PDF)
- D.I.P. CDN367 DeviceNet™ Specifications (124.4 kB, PDF)
- AS01367 Serial Gateway Pin-outs (59.1 kB, PDF)
Device Description Files
- AS01367G-02 Firmware 3.002 EDS File (57.1 kB, EDS)
- AS01367G-01 Firmware 3.001 EDS File (0, EDS)
- CDN367-01 Firmware 2.006 EDS File (114.8 kB, EDS)
Other
- AS0136X/CDN36X Gateway Support Form (146.6 kB, DOCX)
Ultra-High Velocity 