Compare Model Drawings, CAD & Specs Availability Price
10kw pulsed dc plasma generator
Pulsed DC Generator, 10 kW, High Frequency, Asymmetric Bipolar

Specifications

  • Type
    RPDG-100 10kW Pulsed DC Plasma Generator
  • Frequency
    Programmable from 25 to 125 kHz or 50 to 250 kHz (Range set by factory)
  • Duty Cycle
    Programmable from 0 to 40% (Reverse Bias)
  • Power Output
    10kW
  • Power Limit
    10.5kW for rated 10kW output; proportional at other power levels
  • Current Limit
    21A
  • Regulation Modes
    Volts, Amps, Watts
  • Output Control Modes
    Ramping, Run Time, Joule, Sequence, Constant Run
  • DC Linearity/Accuracy Independent of Regulation Mode
    ±0.1%: 10-100% of rated output
  • DC Linearity/Accuracy in Watts Mode
    ±0.25%: 1-10% of rated output
  • Line Regulation
    ±0.1% for ±10% line voltage change ±2% line frequency change
  • Load Regulation
    ±0.1% for a 4:1 load impedance range
  • Line Voltage and Current
    200 - 208V (-7.5%+10%)/35A/45A
    400V (±10%)/19A/25A
    480V (±10%)/16A/21A
    AC Input (3-phase)/Nom/Max
  • Line Frequency
    50 and 60 Hz, ±2%
  • Line-to-Output Efficiency
    >85%
  • Input Power Factor
    >0.7 at maximum power output
  • Fully Functional Front Panel
    Provides complete control and monitoring from the master unit
  • Remote Front Panel
    Provides complete remote control and monitoring functions
  • Blank Front Panel
    Three LEDs indicate AC On, DC On, and Fault
  • Cooling System
    Forced air; front panel & right side in, rear panel out
  • Weight
    55 lbs (25kg)
  • Dimensions
    5.22 x 18.9 x 24.8 inches (132.5 x 480 x 631 mm) (H x W x D) including rack mount & handles
  • Compliance
    CE, CAN/CSA-C22.2 No. 61010.1, UL 61010-1, IEC 68-2-9 test for bump, IEC 68-2-6 test for vibration, IEC 68-2-23 test for bump
  • Operating Temperature
    5 to 40°C
  • Relative Humidity
    80% RH maximum at up to 31°C (decreasing linearly to 50% RH maximum at 40°C) (operational)
  • Maximum Operating Altitude
    +3500 meters above sea level
  • Digital and Analog Interface Connections
    9-pin Type D with RS232 / 422 ENI Protocol, 25 pin Analog
  • Optional Interface Connections
    PROFIBUS®, DNET™
  • Output Connections
    UHF female or Terminal Block
  • AC Input Connections
    5 terminal barrier strip
  • Interlock Connections
    2 terminal PC header
  • Rack Mounting
    EIA (Standard)
    Universal JIS Bracket (optional)

Need help?

Contact an Applications Specialist bysending us an email