Specifications

RMU Remote Monitor Unit Programmable Automation Controller

More about the RMU Remote Monitor Unit Programmable Automation Controller here

RMU Remote Monitor Unit
Processor
CPU Freescale 5200 @ 400MHz, 760MIPS with Floating Point
Real Time Clock Lithium battery-backed
CompactFlash 1 slot Type I, II
SDRAM 128MB
Flash 16MB
Communications
Ethernet Port (2) 10/100 RJ45 connector with EMI filter, LED indicators
Serial Ports (4) ports total - (2) RS232, (2) RS232/485 software selectable D-sub 9 male connectors
USB USB V1.1 Compliant
CAN CAN2.0 Port, D-sub 9 male
Power
Power Supply 18-30VDC from pluggable 3 pole connector
Power Consumption 10W max for RMU core + 5-17W per I/O card
Digital I/O Card
Digital I/O Power 24VDC ±10%, applied to each connector externally
Number of Digital Inputs 24 per board, each point IN/OUT
Polarity Sink/Source selectable for each 12 I/O
Connection D-sub 37 male
Digital Inputs
Input Current 0.5 to 10 mA
Internal Switching Threshold Sink (0-5V), Source (18-24V)
Digital Outputs
Output Current Max Open collector, 200 mA per point, maximum of 750mA per 6 DO
Analog I/O Card
Number of I/O 16 in/8 out
Resolution 12 bit
Power Internal p/s for ±15V ref
Connection D-sub 37 male
Analog Inputs
Number of Analog Inputs 16 single-ended, 8 differential; software selectable
Input Voltage Range 0-10V, ±10V, ±5V, 0-5V
Input Current Range 0-20mA on units ordered as current input; 250 ohm input impedance
Analog Outputs
Number of Analog Outputs 8 single-ended
Output Voltage Range ±10V
Output Current Max 5mA
Dimensions 4 inches x 4 inches x 2.5 inches with additional 0.6 inches per I/O card (LxHxW)
Environmental
Operating Temperature 0°C to 50°C
Storage Temperature -40°C to 85°C
Humidity 5-95% (non-condensing)
Operating Shock/Vibration GR-63-CORE, Zone 4
Transportation MIL-STD-810E
Software
Linux Resources Boot loader
Linux kernel 2.4.25 with drivers
Initrd file system with all the standard utilities based on glibc-2.3 (gcc 3.3.3)
BusyBox 1.01
Journaling Flash File System (jffs2)
Compact Flash accessible as /dev/hda1
Web server
Device Drivers and Code Examples Ethernet ports, including Modbus/TCP API
Digital I/O card (polled and interrupt)
Analog I/O card
Serial ports
Display
USB
CAN

Specifications are subject to change without notice.
Copyright MKS Instruments, Inc. unless noted otherwise.

Need help?

Contact an Applications Specialist by sending an email to MKS Instruments, or call 512-719-8000.