Specifications

MultiTherm 1000 EtherCAT™ Temperature Controller

More about the MultiTherm 1000 EtherCAT™ Temperature Controller here

MultiTherm 1000
Connectivity EtherCAT® Slave - Supporting PDO and Mailbox (CoE and FoE)
TCP/IP - Supporting ModbusTCP
Temperature Range 0 - 850° C
Input Channels 16, T/C's (J & K), RTD's (PT100, 3-wire)
Output Channels 16 SSR output ch's supporting up to 2A built-in
Input Accuracy ±0.8 C for T/C's - typical excluding sensor accuracy
±0.1 C for RTD's - typical excluding sensor accuracy
Sensor Acquisition Time 10 - 625 ms (configurable)
Temperature Resolution 0.01° C
Input Repeatability Better than 0.1° C depending on sensor type and range
Output Power 2A @ 110VAC or 220VAC using internal SSR's
Higher power handling using optional external drivers
Heater control method Zero Crossing & Phase Fire (user selectable)
Output Resolution 0.01% Full Scale power
Isolation 1.5kV rms
Safety Interlocks 2 user-defined interlock inputs (DI's)
Heater connector detection interlock
Programmable SW interlock
Control Methods Control via EtherCAT Master
PID with auto-tuning
Model Based Control (optional)
Calibration intervals 12 months typical
depends on sensor type, calibration temperature range and required accuracy
Environmental 0 to +50°C operating temperature
0-85 % RH, no condensation
Mounting DIN rail and wall mount options
Compliance ROHS, CE
Dimensions 4.72 inches high
6.5 inches wide
8.2 inches deep

Specifications are subject to change without notice.
EtherCAT® is a registered trademark of EtherCAT Technology Group, Nuremberg, Germany.
Copyright MKS Instruments, Inc. unless noted otherwise.

Need help?

Contact an Applications Specialist by sending an email to MKS Instruments, or call 512-719-8000.