Specifications

DIDO-0710 3U Digital Input/Output Card

More about the DIDO-0710 3U Digital Input/Output Card here

DIDO-0710
PCB Dimensions 100mm (3.9370") Height x 160mm (6.2992") Depth x 1.6mm (0.0629") Thickness
Form Factor Plug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
Rear Connectors Metric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution).
Front Panel 128.5mm Height x 20.32mm Depth x 2.5 mm Thickness.
Weight 200 g (0.44 lb)
Operating Temperature 0 to 70°C
Storage -40 to +85°C
Humidity 5-95% non-condensing
BUS Interface Compact PCI, 32 bit (16 bit data transfer) 33MHz
Plug and Play Supports auto-recognition of board on power-on and plug-in; includes Device ID, Vendor ID, and configuration
Front Panel Indicators 48 I/O points, 3.3V, 5V, 5V ext, 24V, HB, BIT
Watchdog Timer Disables outputs (sets all outputs to inactive +24V on timeout)
I/O Protection 2A fuse on each output driver. Suppression diode on each digital I/O port.
Response Time Write to Output Change - 100 us max
Input Change to Read - 150 us max
Digital Section +3.3VDC @ 20 mA, +5VDC @ 220 mA from J1
I/O Section +24VDC from J2, +5V ExT generated on-board
Number of I/O 48 points (input or output)
Input Current sinking, active low. Active input, 6 mA.
Output Current sinking, active low. Output, 200 mA max

Specifications are subject to change without notice.
Copyright MKS Instruments, Inc. unless noted otherwise.

Need help?

Contact an Applications Specialist by sending an email to MKS Instruments, or call 512-719-8000.