Specifications

AIAO-0700 3U Analog Input/Output Card

More about the AIAO-0700 3U Analog Input/Output Card here

AIAO-0700 3U
PCB Dimensions 100mm (3.9370") Height x 160mm (6.2992") Depth x 1.6mm (0.0629") Thickness
Form Factor Plug in Eurocard, 3U Height, 8 HP Width (1 slot), IEEE (1101.1, 101.10 and P1101.11)
Rear Connectors Metric 2.0mm grid, female connector type A is used for J1 (cPCI BUS) and J2 (Signal distribution).
Front Panel 128.5mm Height x 20.32mm Depth x 2.5mm Thickness.
Weight 200 g (0.44 lb)
Operating Temperature 0 to 70°C
Storage -40 to +85°C
Humidity 5-95% non-condensing
BUS Interface Compact PCI, 32 bit (16 bit data transfer) 33MHz
Plug and Play Supports auto-recognition of board on power-on and plug-in; includes Device ID, Vendor ID, and configuration
Front Panel Indicators 3.3V, 5V, -15V, +15V, HB, BIT
Watchdog Timer Disables outputs (sets all outputs to inactive 0V on timeout)
I/O Protection 2A fuse on each output driver
Response Time Write to Output Change - 100 us max
Input Change to Read - 150 us max
Power
Digital Section +3.3VDC @ 20 mA, +5VDC @ 1.36 mA from J1
I/O Section ±15VDC @ 200 mA max generated from on-board 6W DC/DC
Input/Output
Number of I/O 48 points (32 input, 16 output)
Input Single ended
Output Single ended, ±5mA max
Range Software-selectable - 0V to 10V, -5V to +5V
Resolution 12-bit
Accuracy Full-scale of ±0.2%
Zero Volt - ±5 mV

Specifications are subject to change without notice.

Copyright MKS Instruments, Inc. unless noted otherwise.

Need help?

Contact an Applications Specialist by sending an email to MKS Instruments, or call 512-719-8000.