HPS® Series 47 Heater Base Station

9-Pin Dsub Connector:

Pin 2 is Receive RX

Pin 3 is Transmit TX

Pin 5 is Ground

RJ45:

To wire the 9-pin D-sub to RJ45 adapter, pins 4 and 8 on the D-sub are connected to pin 3 on the RJ45. Pins 5 and 9 (D-sub) are connected to pin 4 (RJ45), and GND (pin 1 on the D-sub) is connected to pin 6 (RJ45). The adapter is now ready for use with the base station.

Note:

This information is subject to change without notice.

Need help?

Contact MKS Instruments by sending an email to MKS or call 800-227-8766 or 978-645-5500 (outside the USA).

español MKS Logo Shop | privacy policy | legal | site map