HPS® Series 907 Analog Convection Transducer
Single setpoint version, 9-pin d-sub:
|
Pin
|
Description
|
| 1 |
Set Point Relay - Normally Open Contact |
| 2 |
Set Point Relay - Normally Closed Contact |
| 3 |
Power Supply Input (+) |
| 4 |
Power Supply Input (-) |
| 5 |
Analog Output Voltage (+) |
| 6 |
Set Point Relay - Common |
| 7 |
Set Point Relay - Disable |
| 8 |
Analog Output Voltage (-) |
| 9 |
Set point relay output voltage |
Dual setpoint version, 15-pin high density d-sub:| Pin | Description |
| 1 | Set point relay 1 output voltage |
| 2 | Set point relay 2 output voltage |
| 3 | Power supply input (+) |
| 4 | Power supply input (-) |
| 5 | Analog output voltage (+) |
| 6 | Analog output voltage (-) |
| 7 | Not used |
| 8 | Not used |
| 9 | Not used |
| 10 | Set point relay 1 - normally open contact |
| 11 | Set point relay 2 - normally open contact |
| 12 | Set point relay 2 - common |
| 13 | Set point relay 2 - normally closed contact |
| 14 | Set point relay 1 - normally closed contact |
| 15 | Set point relay 1 - common |
Note:
This information is subject to change without notice.
Need help?
Contact MKS Instruments by sending an email to MKS or call 800-227-8766 or 978-645-5500 (outside the USA).
mksinst.mobi - MKS Instruments for smart phones.
© 2011 by MKS Instruments